How to use fiber optic fusion splicer correctlyIssuing time:2023-03-29 14:31 
The application fields of fiber optic fusion splicers are becoming more and more widespread. Most operators of fiber optic fusion splicers do not receive formal operation training, which inevitably leads to errors in the use process. Today, editor Di Weipu will explain in detail the correct use of fiber optic fusion splicers. Usage of fiber optic fusion splicer: 1. The confirmation device of the fiber optic fusion splicer has a sliding plate with the blade of the fiber optic cutting machine at the front end, and opens the large and small pressing plates; 2. Peel off the coating of optical fiber with fiber stripper, reserve a length of 30-40mm for bare fiber, wrap the optical fiber with alcohol dipped Cotton wool or cotton paper, and then wipe the optical fiber clean. Wipe it once with Cotton wool or cotton paper, and do not wipe it twice with the same Cotton wool or cotton paper (note: please use alcohol with purity greater than 99%). 3. After visually aligning the edge of the optical fiber coating layer with the appropriate scale on the cutter scale (12-20cm), place the optical fiber in the guide groove of the optical fiber cutting machine with your left hand, and place the bare optical fiber straight on the left and right rubber pads.
4. Close the small pressing plate and the large pressing plate of the optical fiber cutting machine, push the slider with blade to make the blade cut the lower surface of the optical fiber, and slide freely to the other side to cut the optical fiber; 5. Hold the fiber cutting machine with your left hand, open the large pressing plate with your right hand, and remove the fiber debris, placing it in a fixed container. 6. Hold the optical fiber with your left hand and open the small clamp of the optical fiber cutting knife with your right hand. Carefully remove the cut end face of the optical fiber, and note that the clean optical fiber section should not touch other objects. Nanjing Diweipu Optoelectronic Technology Co., Ltd. is a high-tech enterprise certified by the ISO9000 quality system, specializing in the research and development, production, and sales of optoelectronic technology products. The company produces and operates optical fiber fusion splicer, Optical time-domain reflectometer (OTDR), light source optical power meter, optical fiber identifier, Optical attenuator, optical fiber and cable, optical cable construction tools and equipment, optical fiber quick connection connector, optical passive components and other products, which are widely used in telecommunications, mobile, China Unicom, posts and telecommunications, radio and television, power, railway, petrochemical, military, coal, scientific research institutions and other fields. Consultation hotline: 400-889-0199 |
